Binary to Text Converter

Convert binary to text in one paste. Spaced or unspaced binary, 8-bit or 7-bit groups and UTF-8 characters such as é and emoji are all decoded, with a byte-by-byte table showing the working.

Paste binary with or without spaces. Line breaks and commas also work as separators.

Show steps

Each group of bits is one byte. The table shows the value of every byte and the character it makes. In UTF-8, accented letters and emoji use two to four bytes.

CharacterCode pointBinaryDecimalHex

Decode Binary Code into Text

Found a string of 0s and 1s in a puzzle, a T-shirt or a homework sheet? This binary to text converter decodes it the moment you paste it. It works out where each character starts, even when the binary has no spaces.

Below the result, a table lists every byte with its decimal and hex value and the character it produces, so you can see how the message was built. The decoding runs in your browser and nothing is uploaded.

Binary code decoded into text01001000 …HiBinary toText

How to convert binary to text

  1. Paste the binary code into the left box. Spaces, line breaks and commas between bytes are all fine.
  2. Read the text on the right. Leave the settings on Auto-detect and UTF-8 for most messages.
  3. Garbled result? Try 7 bits per character for old-style ASCII codes, or Latin-1 for text from older systems.

How to decode binary by hand

Split the binary into bytes of 8 bits. Each bit is worth, from left to right, 128, 64, 32, 16, 8, 4, 2 and 1. Add the values of the 1 bits to get a number, then look the number up in the ASCII table:

ByteCalculationDecimalCharacter
0100100064 + 872H
0110100164 + 32 + 8 + 1105i
0010000132 + 133!

So 01001000 01101001 00100001 reads "Hi!".

Reading binary text at a glance

ASCII was designed so that groups of characters share the same leading bits. Once you know these patterns you can often guess the type of each byte:

Binary rangeDecimalCharacters
0010000032Space
0000101010New line (line feed)
00110000 – 0011100148–57Digits 0–9 (the last four bits are the digit)
01000001 – 0101101065–90A–Z (the last five bits give the letter number)
01100001 – 0111101097–122a–z (same as capitals plus 32)

UTF-8: characters longer than one byte

Accented letters, other alphabets and emoji need more than one byte. In UTF-8 the first bits of a byte tell you how many bytes belong to the character:

First byte starts withBytesExample
01A = 01000001
1102é = 11000011 10101001
11103€ = 11100010 10000010 10101100
111104😀 = 11110000 10011111 10011000 10000000
10–A continuation byte inside a longer character

Fixing common problems

  • "Cannot be split" error: a digit is missing or extra. Check the spacing, or put a space between characters so each group is read on its own.
  • Strange symbols: the bytes may be Latin-1 rather than UTF-8. In Latin-1, 11101001 on its own is é; in UTF-8 it is incomplete.
  • The result looks like random control characters: the binary is probably a number, not text. Use binary to decimal instead.
  • Going the other way: use text to binary, or the binary translator to edit both sides at once.

Frequently Asked Questions

Common questions about converting binary code to text.

Paste the binary into the box above. It is split into 8-bit bytes, each byte becomes a number and the numbers are decoded as UTF-8 text.

It spells "Hello": 72 (H), 101 (e), 108 (l), 108 (l) and 111 (o).

Yes. Unspaced binary is split into groups of 8 bits, or 7 bits if the total length only divides by 7.

ASCII characters only need 7 bits, so some puzzles leave out the leading 0. Computers store text in 8-bit bytes. Auto-detect handles both.

The bytes are not valid UTF-8 at that point. A digit may be missing, or the text was saved in another encoding. Try the Latin-1 setting.

Yes. An emoji is four UTF-8 bytes, so 32 bits. 😀 is 11110000 10011111 10011000 10000000.

Eight characters if they are all plain ASCII, because each character is one 8-bit byte. Accented letters and emoji use more bytes each.

No. Decoding happens in your browser.